Vendor: Ferro Concepts
Type: Sling Mounts
Price: 20.00

Vendor: Reptilia
Type: Optic Mounts
Price: 98.96

The 1.93 inch height DOT Mount™ for HOLOSUN® AEMS™ by Reptilia is a lightweight, slim-line mounting solution for a variety of red dot optics.  Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish, the 1.93 DOT Mount attaches to any M1913 Picatinny rail to place the optical axis at 1.93 inches above the rail.  Its spring-loaded nitrided steel clamp and mounting bolt simplify the installation process, and sit flush with the body of the mount for a low-profile, anti-snag design.

Like all Reptilia products, the DOT Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.

Compatible with:

Holosun – AEMS®

Vendor: Reptilia
Type: Optic Mounts
Price: 98.96

The 1.93 DOT Mount™ for Holosun HE509T by Reptilia is a lightweight, slim-line mounting solution for a variety of red dot optics.  Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish, the 1.93 DOT Mount attaches to any M1913 Picatinny rail to place the optical axis at 1.93 inches above the rail.  Its spring-loaded nitrided steel clamp and mounting bolt simplify the installation process, and sit flush with the body of the mount for a low-profile, anti-snag design.

Like all Reptilia products, the DOT Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.  Additional heights and optic configurations coming soon!

Compatible with:

Holosun® Technologies –  HS509T

Holosun®/Primary Arms – HE509-RD ACSS Vulcan Reticle

Vendor: Reptilia
Type: Optic Mounts
Price: 85.46

The 1.93″ TRIJICON MRO Mount by Reptilia is a lightweight, slim-line mounting solution for a variety of red dot optics. Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish, the 1.93 DOT Mount attaches to any M1913 Picatinny rail to place the optical axis at 1.93 inches above the rail. Its spring-loaded nitrided steel clamp and mounting bolt simplify the installation process, and sit flush with the body of the mount for a low-profile, anti-snag design.

Like all Reptilia products, the TRIJICON MRO mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects. Additional heights and optic configurations coming soon!

Vendor: Reptilia
Type: Optic Mounts
Price: 98.96

The 1.93 DOT Mount™ by Reptilia is a lightweight, slim-line mounting solution for a variety of red dot optics.  Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish, the 1.93 DOT Mount attaches to any M1913 Picatinny rail to place the optical axis at 1.93 inches above the rail.  Its spring-loaded nitrided steel clamp and mounting bolt simplify the installation process, and sit flush with the body of the mount for a low-profile, anti-snag design.

Like all Reptilia products, the DOT Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.  Additional heights and optic configurations coming soon!

Compatible with:

Aimpoint® – Micro R-1, H-1, H-2, T-1, T-2, CompM5
Sig Sauer® – ROMEO4 , ROMEO5 & ROMEO-MSR
Vortex Optics® – Crossfire®, Spitfire®, Sparc® I & II
Primary Arms® – Classic Series Gen II, SLx Advanced Rotary Knob Microdot, & SLx Compact 1×20 Prism Scope – ACSS-Cyclops
Holosun® Technologies –  HS403(not HS403A), HE403, HS503, HE503, HS515, HE515,  & HE530.

Vendor: Reptilia
Type: Optic Mounts
Price: 85.46

The DOT Mount™ by Reptilia is a lightweight, slim-line mounting solution for a variety of red dot optics.  Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish, the DOT Mount attaches to any M1913 Picatinny rail, and offers lower 1/3 co-witness with standard AR15-style back-up sights.  Its spring-loaded nitrided steel clamp and mounting bolt simplify the installation process, and sit flush with the body of the mount for a low-profile, anti-snag design.

Like all Reptilia products, the DOT Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.  Additional heights and optic configurations coming soon!

Compatible with:

Aimpoint® – Micro R-1, H-1, H-2, T-1, T-2, CompM5
Sig Sauer® – ROMEO4 , ROMEO5 & ROMEO-MSR
Vortex Optics® – Crossfire®, Spitfire®, Sparc® I & II
Primary Arms® – Classic Series Gen II, SLx Advanced Rotary Knob Microdot, & SLx Compact 1×20 Prism Scope – ACSS-Cyclops
Holosun® Technologies –  HS403(not HS403A), HE403, HS503, HE503, HS515, HE515,  & HE530.

Vendor: Reptilia
Type: Optic Mounts
Price: 292.46

Introducing the AUS Mount for 34mm diameter magnified optics, from Reptilia. Driven by the request of an end user group, the AUS Mount is the culmination of a 2 year development program. Like our DOT Mount line the AUS Mount attaches to any M1913 Picatinny rail via our anti-snag spring-loaded nitrided steel clamp and custom bolt mounting system which can be tightened with either a 5/32 hex or a flat blade driver to sit flush with the body of the mount for a low-profile, streamline design. Also like our DOT Mount line, the AUS mount is machined from a single piece of billet 7075-T6 aluminum and is finished with MIL-STD Type III, Class 2, hard anodize coating.

The AUS is compatible with all of our existing 34mm ROF line, and will be compatible with several new ROF products launching over the coming months.

Like all Reptilia products, the AUS Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.  Additional heights and optic configurations coming soon!

Vendor: Reptilia
Type: Optic Mounts
Price: 292.46

Introducing the AUS Mount for 30mm diameter magnified optics, from Reptilia. Driven by the request of an end user group, the AUS Mount is the culmination of a 2 year development program. Like our DOT Mount line the AUS Mount attaches to any M1913 Picatinny rail via our anti-snag spring-loaded nitrided steel clamp and custom bolt mounting system which can be tightened with either a 5/32 hex or a flat blade driver to sit flush with the body of the mount for a low-profile, streamline design. Also like our DOT Mount line, the AUS mount is machined from a single piece of billet 7075-T6 aluminum and is finished with MIL-STD Type III, Class 2, hard anodize coating.

The AUS is compatible with all of our existing 30mm ROF line, and will be compatible with several new ROF products launching over the coming months.

Like all Reptilia products, the AUS Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.  Additional heights and optic configurations coming soon!

Vendor: Reptilia
Type: Sling Mounts
Price: 44.96

Introducing the Socket™ Mount M-LOK® QD attachment point, from Reptilia. Driven by the request of an end user group, for an anti-snag, low profile, streamline M-LOK attachment.

The Socket mount is machined from a single piece of billet 7075-T6 aluminum and is finished with MIL-STD Type III, Class 2, hard anodize coating.

Like all Reptilia products, the M-LOK® QD Sling Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.

Vendor: Reptilia
Type: Stocks + Accessories
Price: 31.46

Vendor: Reptilia
Type: Stocks + Accessories
Price: 143.96

Vendor: Reptilia
Type: Stocks + Accessories
Price: 152.96

Introducing the RECC·E™ Carbine Stock by Reptilia®! After more than two years of development and testing, Reptilia is proud to announce the RECC·E Stock for AR10/SR25 pattern rifles. Designed at the request of a military end user, the RECC·E Stock features a constant cheek weld, switchable QD sling attachment points, rubber buttpad, and a modular design that allows usage of a standard AR15 carbine buffer system, or A5/SR25 carbine buffer system by replacing the receiver extension (buffer tube) and forward portion of the stock. Weighing only 12.8 ounces including the proprietary SR-25/A5-length receiver extension, the RECC·E stock is the ideal lightweight solution for the entire spectrum of AR-pattern guns from compact to precision.

Includes our proprietary carbine length receiver extension “buffer tube” and all mounting hardware.

Vendor: True North Concepts
Type: Grips & Stops
Price: 50.00

Standard length Gripstop for M-LOK In Black, Olive Drab or Earth Brown

Specs:

Fits the Magpul M-LOK mounting interface

Weight : 2 oz with hardware

Rugged 6061-T6 Aluminum construction

MilSpec Type III anodized finish

Application:

Increased ergonomics and control on all M-LOK compatible Carbines, Submachine guns and Shotguns

Works with all shooting techniques

Built-in barrier stop for added accuracy

MADE WITH PRIDE IN THE USA

Vendor: Unity Tactical
Type: Optic Mounts
Price: 186.00

FAST™ is a series of optic mounts and platforms that provide end users with a quicker sight picture than standard height mounts. A 2.26” optical centerline height provides faster/easier reticle acquisition while wearing electronic earpro/communications headsets, night vision goggles and gas masks and allows for more rapid visual processing of the battlefield by promoting a heads-up posture.  A heads-up posture also helps users maintain a neutral spine position which is more comfortable while wearing helmets, plate carriers, and other heavy gear.

The FAST™ Micro Mount features built-in standard height back up iron sights that keep weapons uncluttered, without reducing capability.  Both front and rear BUIS are completely adjustable for windage and elevation.  The front sight post can be removed so that the rear BUIS aperture can be used with a traditional front sight such as our FUSION fixed or folding sights  (if present), creating a more conventional sight radius.  However, the built in front/rear BUIS is perfect for backup on super short PDW/SMG platforms where rail space is critical for mounting lights and lasers.

Designed for Aimpoint® Micro (H1, H2, T1, T2, CompM5) and other optics with Aimpoint® Micro footprint, such as those found on many Sig Sauer®, Holosun®, Primary Arms®, and Vortex Optics® platforms.  NOTE: DOES NOT FIT AIMPOINT COMP M5S OR M5B.

The FAST™ Micro Mount comes with a standard rail-grabber clamp mount, but is designed to readily accept a drop-in American Defense Manufacturing® patented QD Auto-Lock™ Lever (sold separately).  This mounting option will provide quick detach capability.

The FAST™ Micro Mount is built from 7075-T6 Aluminum and Type III Hardcoat Anodized Black or FDE*.

COMPATIBILITY:

Aimpoint T1, T2, CompM5, H1, H2

Vortex Optics Crossfire

Sig Sauer Romeo4T

Holosun 503

Vendor: Unity Tactical
Type: Optic Mounts
Price: 95.00

FAST™ is a series of optic mounts and platforms that provide end users with a quicker sight picture than standard height mounts. A 2.26” optical centerline height provides faster/easier reticle acquisition while wearing electronic earpro/communications headsets, night vision goggles and gas masks and allows for more rapid visual processing of the battlefield by promoting a heads-up posture. A heads-up posture also helps users maintain a neutral spine position which is more comfortable while wearing helmets, plate carriers, and other heavy gear.

FAST™ Riser securely elevates block-type red dot optics with a standard lower 1/3 cowitness picatinny mount to a 2.26″ optical center line.  FAST™ Riser provides an elevated M1913 Picatinny platform for direct attachment of optics such as EOTech EXPS®, Leupold LCO®, Vortex UH-1®, and other “lower 1/3” optics*.

*Technically, the FAST™ Riser will support “absolute cowitness” optics such as EOTech XPS®, Sig Sauer Romeo8H®, etc.  But, compatibility with the FAST™ FTC Magnifier Mount will be limited.

The FAST™ Riser comes standard with a rail-grabber clamp.

The FAST™ Riser is built from 7075-T6 Aluminum and Type III Hardcoat Anodized Black or FDE*.

Vendor: True North Concepts
Type: Grips & Stops
Price: 51.99

Shorter length Gripstop for M-LOK

Specs:

Fits the Magpul M-LOK mounting interface

Weight : 2 oz with hardware

Rugged 6061-T6 Aluminum construction

MilSpec Type III anodized finish

Application:

Increased ergonomics and control on all M-LOK compatible Carbines, Submachine guns and Shotguns

Works with all shooting techniques

Built-in barrier stop for added accuracy

MADE WITH PRIDE IN THE USA

Vendor: Unity Tactical
Type: Optic Mounts
Price: 235.00

FAST™ is a series of optic mounts and platforms that provide end users with a quicker sight picture than standard height mounts. A 2.26” optical centerline height provides faster/easier reticle acquisition while wearing electronic earpro/communications headsets, night vision goggles and gas masks and allows for more rapid visual processing of the battlefield by promoting a heads-up posture. A heads-up posture also helps users maintain a neutral spine position which is more comfortable while wearing helmets, plate carriers, and other heavy gear.

FAST™ FTC Magnifier Mounts feature the first ever Flip-To-Center (FTC) mechanism (patent-pending), providing stowage completely within the footprint of the weapon’s receiver while not occluding the host optic’s sight picture. This provides the most optic capability with the lowest profile during all modes of operation. The revolutionary FTC function completely solves the problem posed by legacy flip-to-side magnifier mounts (when disengaged, the magnifier hangs off the side of the gun, creating a major snag hazard). FAST™ FTC Magnifier Mounts completely eliminate this danger and utilize a force-to-overcome mechanism for rapid transition.

The FAST™ OMNI Flip-To-Center Magnifier Mount is compatible with a host of popular magnifiers from EOTech, Vortex Optics, Trijicon, and Sig Sauer.  See description below for a complete list.

FAST™ FTC Magnifier Mounts come complete with American Defense Manufacturing® patented QD Auto-Lock™ Lever.

COMPATIBILITY:

EOTech G23, G30, G33, G43, G45

Vortex Optics VMX-3T, Micro3X, Micro6X

Trijicon 3X MAG-C

Sig Sauer Juliet3X, Juliet4X, Juliet Micro3X

Vendor: True North Concepts
Type: Grips & Stops
Price: 24.99

The new injection-molded Polymer GripStop is lightweight and strong, offering a cost-effective alternative to the legacy Milspec aluminum model.

The original GripStop was first released in 2013 after years of research and design. Created by a Marine combat veteran, the GripStop will benefit a wide variety of different shooting styles and firearm types. The GripStop is smaller than a vertical grip, but larger than a “hand stop”. The GripStop was the first product to properly address correct shooter ergonomics. The unique serrated front radius allows the shooter to “pull” the firearm rearward into the shoulder pocket and maintain a solid hold on the gun with the support hand. This feature also works great as a barrier-stop against walls, rock, automotive frames, and barricades. The GripStop has been combat-proven by American Special Operations Forces and Marines in multiple combat theaters and will survive the toughest abuse. This product holds a lifetime, “no questions asked” free replacement guarantee.

Specs:

• Fits the Magpul M-LOK mounting interface
• Weight: 0.7 oz with hardware
• Rugged reinforced polymer construction
• Comes with mounting hardware and Allen wrench
• Available in Black or Earth Brown

Application:

• Provides increased ergonomics and control on all M-LOK compatible Carbines, Submachine guns and Shotguns.
• Works with all shooting techniques
• Built-in barrier stop for added accuracy

MADE WITH PRIDE IN THE USA

Vendor: True North Concepts
Type: Grips & Stops
Price: 24.99

The new injection-molded Polymer GripStop “K” model is lightweight and strong, offering a cost-effective alternative to the legacy Milspec aluminum model.

The original GripStop was first released in 2013 after years of research and design. Created by a Marine combat veteran, the GripStop will benefit a wide variety of different shooting styles and firearm types. The GripStop is smaller than a vertical grip, but larger than a “hand stop”. The GripStop was the first product to properly address correct shooter ergonomics. The unique serrated front radius allows the shooter to “pull” the firearm rearward into the shoulder pocket and maintain a solid hold on the gun with the support hand. This feature also works great as a barrier-stop against walls, rock, automotive frames, and barricades. The GripStop and GripsStop “K” has been combat-proven by American Special Operations Forces and Marines in multiple combat theaters and will survive the toughest abuse. This product holds a lifetime, “no questions asked” free replacement guarantee.

Specs:

• Fits the Magpul M-LOK mounting interface
• Weight: 0.7 oz with hardware
• Rugged reenforced polymer construction
• Comes with mounting hardware and Allen wrench
• Available in Black or Earth Brown

Application:

• Provides increased ergonomics and control on all M-LOK compatible Carbines, Submachine guns and Shotguns.
• Works with all shooting techniques
• Built-in barrier stop for added accuracy

MADE WITH PRIDE IN THE USA

Vendor: Unity Tactical
Type: Helmet Accessories
Price: 81.00

Yielding a more than 25% weight reduction from currently fielded NVG shrouds, the SUMMIT™ Three-Hole Shroud provides a superior strength-to-weight ratio. It secures night vision electro-optics, lights, cameras and other accessories with a proven fit that is sturdy and reliable. With an over-molded unibody construction, the SUMMIT™ shroud is durable in even the most austere environments, featuring a high-impact polymer shroud and a fixed over-molded stainless steel insert.

Available in five FED-STD colors for retrofit of ArmorSource™, Avon Protection™ Ceradyne, Busch PROtective®, Galvion™, MTEK™, Ops-Core® and many other global helmet brands utilizing the standard three-hole pattern. Hardware for various helmet types included (see details in Description below).

COMPATIBILITY:

Most helmet shells utilizing a standard three-hole pattern, including but not limited to: ArmorSource™, Avon Protection™ Ceradyne (Bolted Models), Busch PROtective®, Galvion™, MTEK™, Ops-Core® and others

WEIGHT:

OZ: <0.95
G: <27

MATERIAL:

Shroud: High-Impact Polymer
Insert: Machined Stainless Steel

DIMENSIONS (WxH):

IN: 4.2 X 3.84
CM: 10.67 X 9.75

COLORS:

Black (FED-STD-595C #37030)
Cam Green (FED-STD-595C #34094)
Coyote Brown (FED-STD-595C #20150)
Desert Tan (FED-STD-595C #33446)
Foliage Green (FED-STD-595C #34160)

INCLUDED HARDWARE:

Three (3) 4-40 x 5/16″ Cap Screws
Three (3) 4-40 x 1/2″ Cap Screws
Three (3) 4-40 x 5/8″ Cap Screws
Three (3) #4 Washers
Three (3) Shroud Nuts
One (1) T8 Torx Wrench

Vendor: Unity Tactical
Type: Optic Mounts
Price: 241.00

FAST™ is a series of optic mounts and platforms that provide end users with a quicker sight picture than standard height mounts. A 2.26” optical centerline height provides faster/easier reticle acquisition while wearing electronic earpro/communications headsets, night vision goggles and gas masks and allows for more rapid visual processing of the battlefield by promoting a heads-up posture. A heads-up posture also helps users maintain a neutral spine position which is more comfortable while wearing helmets, plate carriers, and other heavy gear.

FAST™ FTC Magnifier Mounts feature the first ever Flip-To-Center (FTC) mechanism (patent-pending), providing stowage completely within the footprint of the weapon’s receiver while not occluding the host optic’s sight picture at all. This provides the most optic capability with the lowest profile during all modes of operation.  The revolutionary FTC function completely solves the problem posed by legacy flip-to-side magnifier mounts (when disengaged, the magnifier hangs off the side of the gun, creating a major snag hazard).  FAST™ FTC Magnifier Mounts completely eliminate this danger and utilize a force-to-overcome mechanism for rapid transition.   Designed for Aimpoint® Magnifiers (3XMag-1, 3X-C) and some other 30mm magnifiers.

FAST™ FTC Magnifier Mounts come complete with American Defense Manufacturing® patented QD Auto-Lock™ Lever.

The FAST™ FTC Magnifier Mount is built from 7075-T6 Aluminum and Type III Hardcoat Anodized Black or FDE*.

Vendor: Q
Type: Sling Mounts
Price: 20.00

It is time to lighten the load and throw out your old QD Swivels. The Sling Devil was designed with intent to attach slings that utilize paracord to any desired part of the firearm.

PRODUCT FEATURES:

• GLASS FILLED NYLON

• 0.064 oz

Vendor: True North Concepts
Type: Grips & Stops
Price: 50.00

Shorter length Gripstop for M-LOK

Specs:

Fits the Magpul M-LOK mounting interface

Weight : 2 oz with hardware

Rugged 6061-T6 Aluminum construction

MilSpec Type III anodized finish

Application:

Increased ergonomics and control on all M-LOK compatible Carbines, Submachine guns and Shotguns

Works with all shooting techniques

Built-in barrier stop for added accuracy

MADE WITH PRIDE IN THE USA

Vendor: GBRS Group
Type: Optic Mounts
Price: 349.99

WHAT'S INCLUDED: