Vendor: Reptilia
Type: Lighting Accessories
Price:
116.96
Introducing the TORCH™ 6V/2xCR123 Light Body with Integral M-LOK® Mount. Machined from aircraft grade billet aluminum with Milspec Type III Hardcoat Anodized finish, the TORCH is optimized for use with the ATPIAL/PEQ 15, NGAL, and other top-mounted aiming laser devices. Featuring an integral uni-body M-LOK interface it is not only low profile, but provides the most robust M-LOK weapon light mounting solution on the market today.
Available immediately in both left and right hand variants, the TORCH-6v/2xCR123 is compatible with Surefire SCOUT M600 light bezels, tail caps and pressure switch caps. The TORCH 6v/2xCR123 is available in MIL-STD Type III, Class 2, hard anodize, Black, and Clear.
Like all Reptilia products, the TORCH-6v/CR123 is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.
Vendor: Reptilia
Type: Lighting Accessories
Price:
107.96
Introducing the TORCH™ Light Body with Integral M-LOK® Mount. Machined from aircraft grade billet aluminum with Milspec Type III Hardcoat Anodized finish, the TORCH is optimized for use with the ATPIAL/PEQ 15, NGAL, and other top-mounted aiming laser devices. Featuring an integral uni-body M-LOK interface it is not only low profile, but provides the most robust M-LOK weapon light mounting solution on the market today. Available immediately in both left and right hand variants, the TORCH 3V/CR123 is compatible with SureFire® M300 Scout bezels and tail caps. 6V/CR123 versions coming soon.
The TORCH 3V is immediately available in MIL-STD Type III, Class 2, black and contract over-run Tobacco.
Vendor: Reptilia
Type: Lighting Accessories
Price:
107.96
Introducing the TORCH™ 18350 Light Body with Integral M-LOK® Mount. Machined from aircraft grade billet aluminum with Milspec Type III Hardcoat Anodized finish, the TORCH is optimized for use with the ATPIAL/PEQ 15, NGAL, and other top-mounted aiming laser devices. Featuring an integral uni-body M-LOK interface it is not only low profile, but provides the most robust M-LOK weapon light mounting solution on the market today.
Available immediately in both left and right hand variants, the TORCH 18350 is compatible with Modlite Systems bezels and tail caps as well as Surefire KE2-DF bezel and tail caps and pressure switch caps. The TORCH 18350 is available in MIL-STD Type III, Class 2, hard anodize, black, Tobacco, and Clear.
Like all Reptilia products, the TORCH-18350 is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.
Vendor: Reptilia
Type: Magazine Accessories
Price:
21.56
Introducing the Reptilia Black Hole™ Polymer Magwell for GLOCK® pistols. Molded from reinforced polymer, the Black Hole’s enlarged magazine well opening helps facilitate more efficient reloads without adding unnecessary bulk to your carry or duty sidearm. Compatible with GLOCK 19 pistols, the Black Hole utilizes a unique rear spacer to ensure seamless fit and compatibility with both Gen 3 & Gen 4 frames. Available immediately for GLOCK 19.
Note: Not compatible with 10 round factory Glock magazines but is compatible with Magpul® 10 round magazines.
Watch the Installation video.
Made for:
GLOCK 19 – Generation 3
GLOCK 19 – Generation 4 (with and without back-straps)
Vendor: Reptilia
Type: Optic Mounts
Price:
98.96
The 1.93 inch height DOT Mount™ for HOLOSUN® AEMS™ by Reptilia is a lightweight, slim-line mounting solution for a variety of red dot optics. Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish, the 1.93 DOT Mount attaches to any M1913 Picatinny rail to place the optical axis at 1.93 inches above the rail. Its spring-loaded nitrided steel clamp and mounting bolt simplify the installation process, and sit flush with the body of the mount for a low-profile, anti-snag design.
Like all Reptilia products, the DOT Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.
Compatible with:
Holosun – AEMS®
Vendor: Reptilia
Type: Optic Mounts
Price:
98.96
The 1.93 DOT Mount™ for Holosun HE509T by Reptilia is a lightweight, slim-line mounting solution for a variety of red dot optics. Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish, the 1.93 DOT Mount attaches to any M1913 Picatinny rail to place the optical axis at 1.93 inches above the rail. Its spring-loaded nitrided steel clamp and mounting bolt simplify the installation process, and sit flush with the body of the mount for a low-profile, anti-snag design.
Like all Reptilia products, the DOT Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects. Additional heights and optic configurations coming soon!
Compatible with:
Holosun® Technologies – HS509T
Holosun®/Primary Arms – HE509-RD ACSS Vulcan Reticle
Vendor: Reptilia
Type: Optic Mounts
Price:
85.46
The 1.93″ TRIJICON MRO Mount by Reptilia is a lightweight, slim-line mounting solution for a variety of red dot optics. Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish, the 1.93 DOT Mount attaches to any M1913 Picatinny rail to place the optical axis at 1.93 inches above the rail. Its spring-loaded nitrided steel clamp and mounting bolt simplify the installation process, and sit flush with the body of the mount for a low-profile, anti-snag design.
Like all Reptilia products, the TRIJICON MRO mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects. Additional heights and optic configurations coming soon!
Vendor: Reptilia
Type: Optic Mounts
Price:
98.96
The 1.93 DOT Mount™ by Reptilia is a lightweight, slim-line mounting solution for a variety of red dot optics. Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish, the 1.93 DOT Mount attaches to any M1913 Picatinny rail to place the optical axis at 1.93 inches above the rail. Its spring-loaded nitrided steel clamp and mounting bolt simplify the installation process, and sit flush with the body of the mount for a low-profile, anti-snag design.
Like all Reptilia products, the DOT Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects. Additional heights and optic configurations coming soon!
Compatible with:
Aimpoint® – Micro R-1, H-1, H-2, T-1, T-2, CompM5
Sig Sauer® – ROMEO4 , ROMEO5 & ROMEO-MSR
Vortex Optics® – Crossfire®, Spitfire®, Sparc® I & II
Primary Arms® – Classic Series Gen II, SLx Advanced Rotary Knob Microdot, & SLx Compact 1×20 Prism Scope – ACSS-Cyclops
Holosun® Technologies – HS403(not HS403A), HE403, HS503, HE503, HS515, HE515, & HE530.
Vendor: Reptilia
Type: Optic Mounts
Price:
85.46
The DOT Mount™ by Reptilia is a lightweight, slim-line mounting solution for a variety of red dot optics. Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish, the DOT Mount attaches to any M1913 Picatinny rail, and offers lower 1/3 co-witness with standard AR15-style back-up sights. Its spring-loaded nitrided steel clamp and mounting bolt simplify the installation process, and sit flush with the body of the mount for a low-profile, anti-snag design.
Like all Reptilia products, the DOT Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects. Additional heights and optic configurations coming soon!
Compatible with:
Aimpoint® – Micro R-1, H-1, H-2, T-1, T-2, CompM5
Sig Sauer® – ROMEO4 , ROMEO5 & ROMEO-MSR
Vortex Optics® – Crossfire®, Spitfire®, Sparc® I & II
Primary Arms® – Classic Series Gen II, SLx Advanced Rotary Knob Microdot, & SLx Compact 1×20 Prism Scope – ACSS-Cyclops
Holosun® Technologies – HS403(not HS403A), HE403, HS503, HE503, HS515, HE515, & HE530.
Vendor: Reptilia
Type: Optic Mounts
Price:
292.46
Introducing the AUS Mount for 34mm diameter magnified optics, from Reptilia. Driven by the request of an end user group, the AUS Mount is the culmination of a 2 year development program. Like our DOT Mount line the AUS Mount attaches to any M1913 Picatinny rail via our anti-snag spring-loaded nitrided steel clamp and custom bolt mounting system which can be tightened with either a 5/32 hex or a flat blade driver to sit flush with the body of the mount for a low-profile, streamline design. Also like our DOT Mount line, the AUS mount is machined from a single piece of billet 7075-T6 aluminum and is finished with MIL-STD Type III, Class 2, hard anodize coating.
The AUS is compatible with all of our existing 34mm ROF line, and will be compatible with several new ROF products launching over the coming months.
Like all Reptilia products, the AUS Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects. Additional heights and optic configurations coming soon!
Vendor: Reptilia
Type: Optic Mounts
Price:
292.46
Introducing the AUS Mount for 30mm diameter magnified optics, from Reptilia. Driven by the request of an end user group, the AUS Mount is the culmination of a 2 year development program. Like our DOT Mount line the AUS Mount attaches to any M1913 Picatinny rail via our anti-snag spring-loaded nitrided steel clamp and custom bolt mounting system which can be tightened with either a 5/32 hex or a flat blade driver to sit flush with the body of the mount for a low-profile, streamline design. Also like our DOT Mount line, the AUS mount is machined from a single piece of billet 7075-T6 aluminum and is finished with MIL-STD Type III, Class 2, hard anodize coating.
The AUS is compatible with all of our existing 30mm ROF line, and will be compatible with several new ROF products launching over the coming months.
Like all Reptilia products, the AUS Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects. Additional heights and optic configurations coming soon!
Vendor: Reptilia
Type: Sling Mounts
Price:
44.96
Introducing the Socket™ Mount M-LOK® QD attachment point, from Reptilia. Driven by the request of an end user group, for an anti-snag, low profile, streamline M-LOK attachment.
The Socket mount is machined from a single piece of billet 7075-T6 aluminum and is finished with MIL-STD Type III, Class 2, hard anodize coating.
Like all Reptilia products, the M-LOK® QD Sling Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.
Vendor: Reptilia
Type: Stocks + Accessories
Price:
31.46
Vendor: Reptilia
Type: Stocks + Accessories
Price:
143.96
Introducing the RECC·E™ SR-15/M4/AR-15 Carbine Stock by Reptilia®! After more than two years of development and testing, Reptilia is proud to announce the RECC·E Stock for AR15/M4. Designed at the request of a military end user, the RECC·E Stock features a constant cheek weld, ambidextrous QD sling attachment points, rubber buttpad, and a modular design that allows usage of a standard AR15 carbine buffer system, or A5/SR25 carbine buffer system by replacing the receiver extension (buffer tube) and forward portion of the stock. Weighing only 12.0 ounces including the proprietary AR15 carbine-length receiver extension, the RECC·E stock is the ideal lightweight solution for the entire spectrum of AR-pattern guns from compact to precision.
Includes our proprietary carbine length receiver extension “buffer tube” and all mounting hardware.
Vendor: Reptilia
Type: Stocks + Accessories
Price:
152.96
Introducing the RECC·E™ Carbine Stock by Reptilia®! After more than two years of development and testing, Reptilia is proud to announce the RECC·E Stock for AR10/SR25 pattern rifles. Designed at the request of a military end user, the RECC·E Stock features a constant cheek weld, switchable QD sling attachment points, rubber buttpad, and a modular design that allows usage of a standard AR15 carbine buffer system, or A5/SR25 carbine buffer system by replacing the receiver extension (buffer tube) and forward portion of the stock. Weighing only 12.8 ounces including the proprietary SR-25/A5-length receiver extension, the RECC·E stock is the ideal lightweight solution for the entire spectrum of AR-pattern guns from compact to precision.
Includes our proprietary carbine length receiver extension “buffer tube” and all mounting hardware.